Difference between revisions of "Mounting Disk Images"

From ForensicsWiki
Jump to: navigation, search
m (Category:Howtos)
Line 50: Line 50:
  # umount /mnt
  # umount /mnt
== Mounting Images Using Alternate Superblocks ==
* [http://sansforensics.wordpress.com/2008/12/18/mounting-images-using-alternate-superblocks/ Mounting Images Using Alternate Superblocks]

Revision as of 15:28, 20 December 2008


To mount a disk image on FreeBSD:

First attach the image to unit #1:

 # mdconfig -a -t vnode -f /big3/project/images/img/67.img -u 1

Then mount:

 # mount -t msdos /dev/md1s1 /mnt
 # ls /mnt

To unmount:

 # umount /mnt
 # mdconfig -d -u 1

To mount the image read-only, use:

 # mdconfig -o readonly -a -t vnode -f /big3/project/images/img/67.img -u 1
 # mount -o ro -t msdos /dev/md1s1 /mnt


To mount a disk image on Linux

# mount -t vfat -o loop=/dev/loop0,ro,noexec img.dd /mnt


# mount -t vfat -o loop=/dev/loop/0,ro,noexec img.dd /mnt

The ro is for read-only.

This will mount NSRL ISOs:

 # mount /home/simsong/RDS_218_A.iso /mnt/nsrl -t iso9660 -o loop=/dev/loop3,ro,noexec 

Some raw images contains multiple partitions (full HD image). In this case, it's necessary to specify a starting offset for each partition.

# mount -t vfat -o loop=/dev/loop0,offset=32256,ro,noexec img.dd /mnt/tmp_1
# mount -t vfat -o loop=/dev/loop1,offset=20974464000,ro,noexec img.dd /mnt/tmp_2

Note: You may need to say /dev/loop/0 instead of /dev/loop0 on some systems

To unmount

# umount /mnt

Mounting Images Using Alternate Superblocks