ForensicsWiki will continue to operate as it has before and will not be shutting down. Thank you for your continued support of ForensicsWiki.

Mounting Disk Images

From ForensicsWiki
Revision as of 17:26, 23 May 2006 by Jfbeckers (Talk | contribs) (To mount a disk image on Linux)

Jump to: navigation, search


To mount a disk image on FreeBSD:

First attach the image to unit #1:

 # mdconfig -a -t vnode -f /big3/project/images/img/67.img -u 1

Then mount:

 # mount -t msdos /dev/md1s1 /mnt
 # ls /mnt

To unmount:

 # umount /mnt
 # mdconfig -d -u 1

To mount the image read-only, use:

 # mdconfig -o readonly -a -t vnode -f /big3/project/images/img/67.img -u 1
 # mount -o ro -t msdos /dev/md1s1 /mnt


To mount a disk image on Linux

# mount -t vfat -o loop=/dev/loop0,ro,noexec img.dd /mnt


# mount -t vfat -o loop=/dev/loop/0,ro,noexec img.dd /mnt

The ro is for read-only.

Some raw images contains multiple partitions (full HD image). In this case, it's necessary to specify a starting offset for each partition.

# mount -t vfat -o loop=/dev/loop0,offset=32256,ro,noexec img.dd /mnt/tmp_1
# mount -t vfat -o loop=/dev/loop1,offset=20974464000,ro,noexec img.dd /mnt/tmp_2

To unmount

# umount /mnt