Difference between pages "Vendors" and "Chip-Off BlackBerry Curve 9320"

From ForensicsWiki
(Difference between pages)
Jump to: navigation, search
(Hardware Vendors)
 
(Created page with "== Tear Down == <ol start="1"> <li>Remove the back panel.</li> </ol> {| border="1" cellpadding="2" |- | 300px |- |} <ol start="2"> ...")
 
Line 1: Line 1:
= Software Vendors =
+
== Tear Down ==
  
; [[AccessData]] - [[Forensic Toolkit]] ([[FTK]])
+
<ol start="1">
: http://www.accessdata.com/products/
+
<li>Remove the back panel.</li>
 +
</ol>
  
; [[ASR Data]] - [[SMART]]
+
{| border="1" cellpadding="2"
: http://www.asrdata.com/SMART/
+
|-
 +
| [[File:1-bb9320-BackPanelRemoved.jpg| 300px ]]
 +
|-
 +
|}
  
; [[BlackBag Technologies]]
+
<ol start="2">
: http://www.blackbagtech.com/software.html
+
<li>Remove the SIM and SD Memory Card.</li>
 +
</ol>
  
; [[Computer Forensic Analysis]]
+
<ol start="3">
: http://www.porcupine.org/forensics/
+
<li>Using a torx-6 screw driver remove the 2 visible screws on the back of the phone.</li>
 +
</ol>
  
; [[Computer Cop Forensic Examiner]]
+
{| border="1" cellpadding="2"
: http://www.computercop.com/examiner.html
+
|-
 +
| [[File:2-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
  
; [[Forensic and Security Services, Inc.]] - [[Rainbow Tables]]
+
<ol start="4">
: http://www.For-Sec.com
+
<li>Remove the screen protector using a shim, guitar pick, or prying tool.</li>
; Hub/MO/VO VAR for
+
</ol>
  
: AccessData
+
{| border="1" cellpadding="2"
: Paraben
+
|-
: Wetstone
+
| [[File:3-bb9320-ScreenRemoval.jpg| 300px ]]
: DiskJockey forensic
+
|-
: Objectif Securite - Rainbow Tables for - LM and NT hashes and MS Office documents
+
|}
  
; [[Guidance Software]] - [[EnCase]]
+
<ol start="5">
: http://www.guidancesoftware.com/products/index.asp
+
<li>Remove 2 torx-5 screws.</li>
 +
</ol>
  
; [[MaresWare Software]]
+
{| border="1" cellpadding="2"
: http://www.maresware.com/maresware/software.htm
+
|-
 +
| [[File:4-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
  
; [[NTI - Forensics International]] Division of Armor Forensics
+
<ol start="6">
: http://www.forensics-intl.com/tools.html
+
<li>Use the shim to detach the outer bezel/keyboard from the device.</li>
 +
</ol>
  
; [[Nuix Pty Ltd]] - [[FBI]]
+
{| border="1" cellpadding="2"
: http://www.nuix.com.au
+
|-
 +
| [[File:5-bb9320-TopPlate.jpg| 300px ]] 5-1-bb9320-TopPlate.jpg| 300px ]]
 +
|-
 +
|}
  
; [[Paraben Forensics]]
+
<ol start="7">
: http://www.paraben-forensics.com/
+
<li>Remove 4 additional torx-6 screws. The main board will now easily be separated from the back plate</li>
 +
</ol>
  
; [[PyFlag]]
+
{| border="1" cellpadding="2"
: http://pyflag.sourceforge.net/
+
|-
 +
| [[File:6-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
  
; Steganography Analysis and Research Center
+
<ol start="8">
: General Product Information http://www.sarc-wv.com/products.aspx
+
<li>Peel off the vendor sticker.</li>
: Steganography Application Fingerprint Database (SAFDB) http://www.sarc-wv.com/safdb.aspx
+
</ol>
: Steganography Analyzer Artifact Scanner (StegAlyzerAS) http://www.sarc-wv.com/stegalyzeras.aspx
+
{| border="1" cellpadding="2"
: Steganography Analyzer Signature Scanner (StegAlyzerSS) http://www.sarc-wv.com/stegalyzerss.aspx
+
|-
 +
| [[File:7-bb9320-VendorPlate.jpg| 300px ]]
 +
|-
 +
|}
  
; [[Tech Assist, Inc.]]
+
<ol start="9">
: http://www.toolsthatwork.com/
+
<li>Remove the plastic cover protecting the track pad ribbon cable, and disconnect the track pad.</li>
 +
</ol>
  
; [[Technology Pathways]] - [[Pro Discover]]
+
<ol start="10">
: http://www.techpathways.com/
+
<li>Remove the final torx-4 screw located beneath the plastic protector, to remove the plastic keyboard overlay.</li>
 +
</ol>
  
; [[Wetstone Technologies]]
+
{| border="1" cellpadding="2"
:http://www.wetstonetech.com/page/page/3004314.htm
+
|-
 +
| [[File:8-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
  
; [[X-Ways Software]]
+
<ol start="11">
: http://www.x-ways.net/
+
<li>Disconnect the ribbon cable connected to the LCD. Then using a pick separate the display from the main board.</li>
 +
</ol>
  
= Hardware Vendors =
+
{| border="1" cellpadding="2"
; [[BlackBag Technologies]]
+
|-
: http://www.blackbagtech.com/hardware.html
+
| [[File:9-bb9320-ScreenRemoval.jpg| 300px ]]
: [[Write Blockers]]
+
|-
 +
|}
  
; [[Digital Intelligence]]
+
<ol start="12">
: http://www.digitalintelligence.com/forensichardware.php
+
<li>The tear down is now complete</li>
: [[Write Blockers]], [[forensic field kit]]s, etc.
+
</ol>
  
; [[Forensic and Security Services, Inc.]] - [[Field kits, write blockers]]
+
{| border="1" cellpadding="2"
: http://www.For-Sec.com
+
|-
; Hub/MO/VO VAR for
+
| [[File:9-1-bb9320-TearDownComplete.jpg| 300px ]]
 +
|-
 +
|}
  
: AccessData
+
eMMC Removal
: Paraben
+
: Wetstone
+
: DiskJockey forensic
+
  
; [[Forensic-Computers]]
+
<ol start="1">
: http://www.forensic-computers.com/
+
<li>The eMMC is located beneath the heat shield directly above the Micro SD card slot.</li>
: Various systems, [[Write Blockers]], [[forensic field kit]]s, etc.
+
</ol>
  
; [[ForensicPC]]
+
{| border="1" cellpadding="2"
: http://www.forensicpc.com/
+
|-
: Various [[Write Blockers]], [[forensic field kit]]s, forensics software, etc.
+
| [[File:10-bb9320-EMMC-Location.jpg| 300px ]]
 +
|-
 +
|}
  
; [[MyKey Tech]]
+
<ol start="2">
: http://www.mykeytech.com/
+
<li>Place the main board in a stand or holder and position it approximately 2 1/2" - 3" inches away from a heat gun or device the blows super hot air.</li>
: [[Write Blockers]]
+
</ol>
  
; [[Paraben Forensics]]
+
{| border="1" cellpadding="2"
: http://www.paraben-forensics.com/catalog/index.php?cPath=26
+
|-
: [[Write Blockers]], [[forensic field kit]]s, etc.
+
| [[File:11-bb9320-HeatShield.jpg| 300px ]]
 +
|-
 +
|}
  
; [[Technology Pathways]]
+
<ol start="3">
: http://www.techpathways.com/
+
<li>Monitoring the temperature the heat shield will come off easily between 190-200 Centigrade.</li>
: [[Write Blockers]]
+
</ol>
  
; [[Wiebetech]]
+
{| border="1" cellpadding="2"
: http://wiebetech.com/
+
|-
: Various [[Write Blockers]], [[forensic field kit]]s, etc.
+
| [[File:12-bb9320-HeatShield.jpg| 300px ]] 13-bb9320-HeatShieldRemoved.jpg| 300px ]]
 +
|-
 +
|}
  
= Training =
+
<ol start="4">
 +
<li>Continue working under the high heat. With the 9315/9320's I've worked on the eMMC has been ready to lift off of the main board using tweezers immediately after removing the heat shield.</li>
 +
</ol>
  
== Open for everyone ==
+
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:14-bb9320-EMMC-Removed.jpg| 300px ]]
 +
|-
 +
|}
  
* [http://www.accessdata.com/training/ AccessData Training]
+
<ol start="5">
* [http://www.forensics-intl.com/training.html Armor Forensics (NTI - Forensics International)]
+
<li>Using liquid flux, or flux paste and a soldering iron clean the pads on the eMMC in preparation for a read</li>
* [http://www.asrdata.com/training/ ASR Data Training]
+
</ol>
* [http://www.blackbagtech.com/training.html BlackBag Tech Training]
+
* [http://www.cce-bootcamp.com/ Certified Computer Examiner BootCamp]
+
* [http://www.cftco.com/ Computer Forensics Training Center On-Line]
+
* [http://www.e-fense.com/training.html e-fense Inc]
+
* [http://www.nuix.com.au/screencasts.html FBI Screencast Training]
+
* [http://www.guidancesoftware.com/training/index.asp Guidance Software (EnCase) Training]
+
* [http://www.infosecinstitute.com/courses/security_training_courses.html InfoSec Institute]
+
* [http://www.crazytrain.com/training.html Linux Data Forensics Training]
+
* [http://www.maresware.com/maresware/training/maresware.htm Maresware Training]
+
* [http://www.paraben-training.com/ Paraben Forensics Training]
+
* [http://www.sarc-wv.com/training.aspx Steganography Analysis and Research Center]
+
* [http://www.techpathways.com/DesktopDefault.aspx?tabindex=5&tabid=9 Technology Pathways Pro Discover Training]
+
* [http://www.vigilar.com/training.html Vigilar]
+
* [http://www.wetstonetech.com/page/page/3004314.htm Wetstone Technologies]
+
  
== Law enforcement only ==
+
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:15-bb9320-EMMC-Cleanup.jpg| 300px ]]
 +
| [[File:16-bb9320-EMMC-Clean.jpg| 300px ]]
 +
|-
 +
|}
  
* [http://www.fletc.gov/cfi/fy06tibsched.htm Federal Law Enforcement Training Center]
+
<ol start="6">
* [http://www.cops.org/ IACIS Computer Training/Certification]
+
<li>The eMMC is now ready to read using the appropriate adapter/programmer and software.</li>
* [http://nw3c.org/ocr/courses_desc.cfm National White Collar Crime Center]
+
</ol>
* [http://www.search.org/programs/hightech/courses.asp Search.Org]
+
 
 +
At the time of this writing (2013OCT29) the eMMC that was removed in this example was read using an UP828 programmer via the "VBGA169E" adapter. The resulting image was then parsed via the CelleBrite Physical Analyzer (V. 3.8.5.108).

Revision as of 13:26, 30 October 2013

Tear Down

  1. Remove the back panel.
1-bb9320-BackPanelRemoved.jpg
  1. Remove the SIM and SD Memory Card.
  1. Using a torx-6 screw driver remove the 2 visible screws on the back of the phone.
2-bb9320-ScrewRemoval.jpg
  1. Remove the screen protector using a shim, guitar pick, or prying tool.
3-bb9320-ScreenRemoval.jpg
  1. Remove 2 torx-5 screws.
4-bb9320-ScrewRemoval.jpg
  1. Use the shim to detach the outer bezel/keyboard from the device.
5-bb9320-TopPlate.jpg 5-1-bb9320-TopPlate.jpg| 300px ]]
  1. Remove 4 additional torx-6 screws. The main board will now easily be separated from the back plate
6-bb9320-ScrewRemoval.jpg
  1. Peel off the vendor sticker.
7-bb9320-VendorPlate.jpg
  1. Remove the plastic cover protecting the track pad ribbon cable, and disconnect the track pad.
  1. Remove the final torx-4 screw located beneath the plastic protector, to remove the plastic keyboard overlay.
8-bb9320-ScrewRemoval.jpg
  1. Disconnect the ribbon cable connected to the LCD. Then using a pick separate the display from the main board.
9-bb9320-ScreenRemoval.jpg
  1. The tear down is now complete
9-1-bb9320-TearDownComplete.jpg

eMMC Removal

  1. The eMMC is located beneath the heat shield directly above the Micro SD card slot.
10-bb9320-EMMC-Location.jpg
  1. Place the main board in a stand or holder and position it approximately 2 1/2" - 3" inches away from a heat gun or device the blows super hot air.
11-bb9320-HeatShield.jpg
  1. Monitoring the temperature the heat shield will come off easily between 190-200 Centigrade.
12-bb9320-HeatShield.jpg 13-bb9320-HeatShieldRemoved.jpg| 300px ]]
  1. Continue working under the high heat. With the 9315/9320's I've worked on the eMMC has been ready to lift off of the main board using tweezers immediately after removing the heat shield.
14-bb9320-EMMC-Removed.jpg
  1. Using liquid flux, or flux paste and a soldering iron clean the pads on the eMMC in preparation for a read
15-bb9320-EMMC-Cleanup.jpg 16-bb9320-EMMC-Clean.jpg
  1. The eMMC is now ready to read using the appropriate adapter/programmer and software.

At the time of this writing (2013OCT29) the eMMC that was removed in this example was read using an UP828 programmer via the "VBGA169E" adapter. The resulting image was then parsed via the CelleBrite Physical Analyzer (V. 3.8.5.108).