Difference between pages "Windows Registry" and "Chip-Off BlackBerry Curve 9320"

From ForensicsWiki
(Difference between pages)
Jump to: navigation, search
m
 
(Created page with "== Tear Down == <ol start="1"> <li>Remove the back panel.</li> </ol> {| border="1" cellpadding="2" |- | 300px |- |} <ol start="2"> ...")
 
Line 1: Line 1:
==Bibliography==
+
== Tear Down ==
* Recovering Deleted Data From the Windows Registry. Timothy Morgan, DFRWS 2008 [http://www.dfrws.org/2008/proceedings/p33-morgan.pdf [paper]] [http://www.dfrws.org/2008/proceedings/p33-morgan_pres.pdf [slides]]
+
* [http://www.pkdavies.co.uk/documents/Computer_Forensics/registry_examination.pdf
+
  
* [http://dfrws.org/2008/proceedings/p26-dolan-gavitt.pdf Forensic Analysis of the Windows Registry in Memory], Brendan Dolan-Gavitt, DFRWS 2008  [http://dfrws.org/2008/proceedings/p26-dolan-gavitt_pres.pdf [slides]]
+
<ol start="1">
* [http://www.pkdavies.co.uk/documents/Computer_Forensics/registry_examination.pdf Forensic Analysis of the Windows Registry], Peter Davies, Computer Forensics: Coursework 2 (student paper)
+
<li>Remove the back panel.</li>
* [http://eptuners.com/forensics/A%20Windows%20Registry%20Quick%20Reference.pdf A Windows Registry Quick-Reference], Derrick Farmer, Burlington, VT.
+
</ol>
  
* [http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B7CW4-4GX1J3B-1&_user=3326500&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000060280&_version=1&_urlVersion=0&_userid=3326500&md5=ab887593e7be6d5257696707886978f1 The Windows Registry as a forensic resource], Digital Investigation, Volume 2, Issue 3, September 2005, Pages 201--205.
+
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:1-bb9320-BackPanelRemoved.jpg| 300px ]]
 +
|-
 +
|}
  
* [http://www.forensicfocus.com/downloads/forensic-analysis-windows-registry.pdf Forensic Analysis of the Windows Registry], Lih Wern Wong , School of Computer and Information Science, Edith Cowan University
+
<ol start="2">
 +
<li>Remove the SIM and SD Memory Card.</li>
 +
</ol>
  
==Tools==
+
<ol start="3">
===Open Source===
+
<li>Using a torx-6 screw driver remove the 2 visible screws on the back of the phone.</li>
* [http://sourceforge.net/projects/regviewer/ regviewer] -- a tool for looking at the registry.
+
</ol>
* [http://www.regripper.net/ RegRipper] --- "the fastest, easiest, and best tool for registry analysis in forensics examinations."
+
===Commercial===
+
* [http://www.abexo.com/free-registry-cleaner.htm Abexo Free Regisry Cleaner]
+
* [http://www.auslogics.com/registry-defrag Auslogics Registry Defrag]
+
* [http://lastbit.com/arv/ Alien Registry Viewer]
+
* [http://www.larshederer.homepage.t-online.de/erunt/index.htm NT Registry Optimizer]
+
* [http://www.registry-clean.net/free-registry-defrag.htm iExpert Software-Free Registry Defrag]
+
  
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:2-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
  
 +
<ol start="4">
 +
<li>Remove the screen protector using a shim, guitar pick, or prying tool.</li>
 +
</ol>
  
==See Also==
+
{| border="1" cellpadding="2"
* [http://windowsir.blogspot.com/search/label/Registry Windows Incident Response Articles on Registry]
+
|-
* [http://www.answers.com/topic/win-registry Windows Registry Information]
+
| [[File:3-bb9320-ScreenRemoval.jpg| 300px ]]
* [http://en.wikipedia.org/wiki/Windows_Registry Wikipedia Article on Windows Registry]
+
|-
[[Category:Bibliographies]]
+
|}
* [http://moyix.blogspot.com/search/label/registry Push the Red Button] - Articles on Registry
+
 
 +
<ol start="5">
 +
<li>Remove 2 torx-5 screws.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:4-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="6">
 +
<li>Use the shim to detach the outer bezel/keyboard from the device.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:5-bb9320-TopPlate.jpg| 300px ]] 5-1-bb9320-TopPlate.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="7">
 +
<li>Remove 4 additional torx-6 screws. The main board will now easily be separated from the back plate</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:6-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="8">
 +
<li>Peel off the vendor sticker.</li>
 +
</ol>
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:7-bb9320-VendorPlate.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="9">
 +
<li>Remove the plastic cover protecting the track pad ribbon cable, and disconnect the track pad.</li>
 +
</ol>
 +
 
 +
<ol start="10">
 +
<li>Remove the final torx-4 screw located beneath the plastic protector, to remove the plastic keyboard overlay.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:8-bb9320-ScrewRemoval.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="11">
 +
<li>Disconnect the ribbon cable connected to the LCD. Then using a pick separate the display from the main board.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:9-bb9320-ScreenRemoval.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="12">
 +
<li>The tear down is now complete</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:9-1-bb9320-TearDownComplete.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
eMMC Removal
 +
 
 +
<ol start="1">
 +
<li>The eMMC is located beneath the heat shield directly above the Micro SD card slot.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:10-bb9320-EMMC-Location.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="2">
 +
<li>Place the main board in a stand or holder and position it approximately 2 1/2" - 3" inches away from a heat gun or device the blows super hot air.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:11-bb9320-HeatShield.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="3">
 +
<li>Monitoring the temperature the heat shield will come off easily between 190-200 Centigrade.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:12-bb9320-HeatShield.jpg| 300px ]] 13-bb9320-HeatShieldRemoved.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="4">
 +
<li>Continue working under the high heat. With the 9315/9320's I've worked on the eMMC has been ready to lift off of the main board using tweezers immediately after removing the heat shield.</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:14-bb9320-EMMC-Removed.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="5">
 +
<li>Using liquid flux, or flux paste and a soldering iron clean the pads on the eMMC in preparation for a read</li>
 +
</ol>
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[File:15-bb9320-EMMC-Cleanup.jpg| 300px ]]
 +
| [[File:16-bb9320-EMMC-Clean.jpg| 300px ]]
 +
|-
 +
|}
 +
 
 +
<ol start="6">
 +
<li>The eMMC is now ready to read using the appropriate adapter/programmer and software.</li>
 +
</ol>
 +
 
 +
At the time of this writing (2013OCT29) the eMMC that was removed in this example was read using an UP828 programmer via the "VBGA169E" adapter. The resulting image was then parsed via the CelleBrite Physical Analyzer (V. 3.8.5.108).

Revision as of 12:26, 30 October 2013

Tear Down

  1. Remove the back panel.
1-bb9320-BackPanelRemoved.jpg
  1. Remove the SIM and SD Memory Card.
  1. Using a torx-6 screw driver remove the 2 visible screws on the back of the phone.
2-bb9320-ScrewRemoval.jpg
  1. Remove the screen protector using a shim, guitar pick, or prying tool.
3-bb9320-ScreenRemoval.jpg
  1. Remove 2 torx-5 screws.
4-bb9320-ScrewRemoval.jpg
  1. Use the shim to detach the outer bezel/keyboard from the device.
5-bb9320-TopPlate.jpg 5-1-bb9320-TopPlate.jpg| 300px ]]
  1. Remove 4 additional torx-6 screws. The main board will now easily be separated from the back plate
6-bb9320-ScrewRemoval.jpg
  1. Peel off the vendor sticker.
7-bb9320-VendorPlate.jpg
  1. Remove the plastic cover protecting the track pad ribbon cable, and disconnect the track pad.
  1. Remove the final torx-4 screw located beneath the plastic protector, to remove the plastic keyboard overlay.
8-bb9320-ScrewRemoval.jpg
  1. Disconnect the ribbon cable connected to the LCD. Then using a pick separate the display from the main board.
9-bb9320-ScreenRemoval.jpg
  1. The tear down is now complete
9-1-bb9320-TearDownComplete.jpg

eMMC Removal

  1. The eMMC is located beneath the heat shield directly above the Micro SD card slot.
10-bb9320-EMMC-Location.jpg
  1. Place the main board in a stand or holder and position it approximately 2 1/2" - 3" inches away from a heat gun or device the blows super hot air.
11-bb9320-HeatShield.jpg
  1. Monitoring the temperature the heat shield will come off easily between 190-200 Centigrade.
12-bb9320-HeatShield.jpg 13-bb9320-HeatShieldRemoved.jpg| 300px ]]
  1. Continue working under the high heat. With the 9315/9320's I've worked on the eMMC has been ready to lift off of the main board using tweezers immediately after removing the heat shield.
14-bb9320-EMMC-Removed.jpg
  1. Using liquid flux, or flux paste and a soldering iron clean the pads on the eMMC in preparation for a read
15-bb9320-EMMC-Cleanup.jpg 16-bb9320-EMMC-Clean.jpg
  1. The eMMC is now ready to read using the appropriate adapter/programmer and software.

At the time of this writing (2013OCT29) the eMMC that was removed in this example was read using an UP828 programmer via the "VBGA169E" adapter. The resulting image was then parsed via the CelleBrite Physical Analyzer (V. 3.8.5.108).