Mounting Disk Images

From ForensicsWiki
Revision as of 08:14, 4 November 2009 by .FUF (Talk | contribs)

Jump to: navigation, search


To mount a disk image on FreeBSD:

First attach the image to unit #1:

 # mdconfig -a -t vnode -f /big3/project/images/img/67.img -u 1

Then mount:

 # mount -t msdos /dev/md1s1 /mnt
 # ls /mnt

To unmount:

 # umount /mnt
 # mdconfig -d -u 1

To mount the image read-only, use:

 # mdconfig -o readonly -a -t vnode -f /big3/project/images/img/67.img -u 1
 # mount -o ro -t msdos /dev/md1s1 /mnt


To mount a disk image on Linux

# mount -t vfat -o loop,ro,noexec img.dd /mnt

The ro is for read-only.

This will mount NSRL ISOs:

 # mount /home/simsong/RDS_218_A.iso /mnt/nsrl -t iso9660 -o loop,ro,noexec 

Some raw images contains multiple partitions (e.g. full HD image). In this case, it's necessary to specify a starting offset for each partition.

# mount -t vfat -o loop,offset=32256,ro,noexec img.dd /mnt/tmp_1
# mount -t vfat -o loop,offset=20974464000,ro,noexec img.dd /mnt/tmp_2


Mounting raw images with multiple partitions is easy with kpartx. Type aptitude install kpartx as root to install kpartx under Debian. kpartx is creating device-mappings for each partition. If the raw image looks like this:

       Device        Boot      Start       End      Blocks Id  System
    rawimage.dd1               1           1        8001   83  Linux
    rawimage.dd2               2           2        8032+   5  Extended
    rawimage.dd5               2           2        8001   83  Linux

creates the command

#   kpartx -v -a rawimage.dd

this mappings


The Partitions can now mount easy with

# mount /dev/mapper/loop0p1 /media/suspectHD_01/ -o ro
# mount /dev/mapper/loop0p5 /media/suspectHD_02/ -o ro

Don't forget the switch -o ro !

To unmount

# umount /mnt

Mounting Images Using Alternate Superblocks