Difference between revisions of "Mount shadow volumes on disk images"

From ForensicsWiki
Jump to: navigation, search
(Mounting the Disk Image)
(Mounting the Shadow Volume)
Line 64: Line 64:
  
 
To work with the Shadow Volumes we will use the VSSAdmin tool bundled
 
To work with the Shadow Volumes we will use the VSSAdmin tool bundled
with Windows 7 Ultimate and Professional editions. Start by opening an
+
with Windows 7 Ultimate and Professional editions.  
Administrator enabled command shell.  This can be done by right
+
 
 +
* Start by opening an Administrator enabled command shell.  This can be done by right
 
clicking on the Command Prompt application in Start > Accessories >
 
clicking on the Command Prompt application in Start > Accessories >
 
Command Prompt and selecting "Run As Administrator".
 
Command Prompt and selecting "Run As Administrator".
  
Once the command prompt is open you can view the available Shadow
+
* Once the command prompt is open you can view the available Shadow
Volumes by typing: vssadmin list shadows.
+
Volumes by typing: "vssadmin list shadows".
  
At this point you may see a long list of Shadow Volumes that were
+
<code>C:\> vssadmin list shadows </code>
 +
 
 +
* At this point you may see a long list of Shadow Volumes that were
 
created both by the machine the disk image is from as well as local
 
created both by the machine the disk image is from as well as local
 
shadow volumes.  To list just the Shadow Volumes associated with the
 
shadow volumes.  To list just the Shadow Volumes associated with the
Line 78: Line 81:
 
DriveLetter is the drive letter that the drive image is mounted on.
 
DriveLetter is the drive letter that the drive image is mounted on.
  
Now that we have a list of the Shadow Volumes we can mount them using
+
<code>C:\> vssadmin list shadows /for=E:\ </code> [[File:vssadmin_list.png|thumb|vssadmin list]]
the mklink tool. To do this, on the command line type:
+
  
<code>mklink /D C:\<some directory> \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy#\</code>
+
* Now that we have a list of the Shadow Volumes we can mount them using
 +
the mklink tool. To do this, on the command line type "mklink /D C:\<some directory> \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy#"
  
 
Where <some directory> is the path that you'd like the mount the
 
Where <some directory> is the path that you'd like the mount the
Line 89: Line 92:
 
error when trying to access the directory.
 
error when trying to access the directory.
  
If all was successful you should receive a message that looks like
+
<code>mklink /D C:\shadow_volume_1 \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\</code>
 +
 
 +
* If all was successful you should receive a message that looks like
 
this:
 
this:
  
<code>symbolic link created for <some directory> <<===>> \\?GLOBALROOT\Device\HarddiskVolumeShadowCopy#\</code>
+
<code>symbolic link created for <some directory> <<===>> \\?GLOBALROOT\Device\HarddiskVolumeShadowCopy1\</code>
  
 
You can now browse the files contained in the Shadow Volume just like
 
You can now browse the files contained in the Shadow Volume just like
any other files in your file system!
+
any other files in your file system! [[File:success.png|thumb|Success!]]

Revision as of 13:45, 24 August 2010

Windows Shadow Volumes when created are automatically mounted at the file system root by Windows. Unfortunately this is invisible to the user and can not be directly accessed. Mklink, an included command line utility that ships with Windows is able to create a symbolic link that allows access to these shadow volumes.

Shadow Volumes that exsit on a drive image are no different. They too can be accessed by creating a symbolic link to the location of the volume. There is a caveat here though -- the Shadow Volume is mounted at the local file system's root rather than the drive image's file system root.

This example will be showing how to mount a virtual disk image in the VHD format using Windows 7's built in tools. It will then proceed to detail the steps of mounting a Shadow Volume that exists on the disk image. Note: Windows 7 Professional or Ultimate edition are required as the necessary tools are not bundled with other versions.


Mounting the Disk Image

The first step is to mount the VHD. If you have a RAW image or another similar format these can be converted to VHD using a tool such as qemu-img (http://wiki.qemu.org/Main_Page) or vmToolkit's Vmdk2Vhd utility (http://vmtoolkit.com/).

  • To mount the VHD bring up the Start menu in Windows.
  • Right click on "Computer" and click "Manage". This will bring up a
window titled "Computer Management".
Open the Computer Management window.
  • Now double click on "Storage" in the center pane.
    Click "storage" in the center pane.
  • Next double click the "Manage Storage" in the center pane.
    Double click "manage storage" in the center pane.
  • Now click the "More Actions" menu in the right most pane and select "Attach VHD".
    Select Attach VHD in the right pane.
  • Browse to the location of the drive image that you would like to mount and hit "OK".


Now that the image is mounted we can begin the examine the Shadow Volumes on it.

Command Prompt Method

These steps can also be accomplished using an administrator enabled Command Prompt. To perform these steps using the command prompt the diskpart command must be used.

  • To start type "diskpart" at the command prompt.

C:\> diskpart

When diskpart starts the prompt will change to say DISKPART>.

  • Next select the drive image by typing "select vdisk file=<path to image>"

where <path to image> is the path to the vhd file.

DISKPART> select vdisk file=C:\myimage.vhd

  • Last type "attach vdisk" or optionally if you'd like to mount it read

only "attach vdisk readonly".

DISKPART> attach vdisk readonly

Mounting the Shadow Volume

To work with the Shadow Volumes we will use the VSSAdmin tool bundled with Windows 7 Ultimate and Professional editions.

  • Start by opening an Administrator enabled command shell. This can be done by right

clicking on the Command Prompt application in Start > Accessories > Command Prompt and selecting "Run As Administrator".

  • Once the command prompt is open you can view the available Shadow

Volumes by typing: "vssadmin list shadows".

C:\> vssadmin list shadows

  • At this point you may see a long list of Shadow Volumes that were

created both by the machine the disk image is from as well as local shadow volumes. To list just the Shadow Volumes associated with the drive image you can add an optional /FOR=<DriveLetter:\> where DriveLetter is the drive letter that the drive image is mounted on.

C:\> vssadmin list shadows /for=E:\
vssadmin list
  • Now that we have a list of the Shadow Volumes we can mount them using

the mklink tool. To do this, on the command line type "mklink /D C:\<some directory> \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy#"

Where <some directory> is the path that you'd like the mount the Shadow Volume at, and the # in HarddiskVolumeShadowCopy is the number o the Shadow Volume to mount. Please note that the trailing slash is absoutely necessary. Without the slash you will receive a permissions error when trying to access the directory.

mklink /D C:\shadow_volume_1 \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\

  • If all was successful you should receive a message that looks like

this:

symbolic link created for <some directory> <<===>> \\?GLOBALROOT\Device\HarddiskVolumeShadowCopy1\

You can now browse the files contained in the Shadow Volume just like

any other files in your file system!
Success!