ForensicsWiki will continue to operate as it has before and will not be shutting down. Thank you for your continued support of ForensicsWiki.
SAFE Block XP
|SAFE Block XP|
The System Acquisition Forensic Environment (SAFE) Block XP software is a software-based write blocker designed for the Windows XP 32 and 64 bit operating system. Because it is software based it allows for disk imaging speeds that are significantly faster than imaging in Windows using commercially available hardware-based write blockers. It also allows you to write block as many devices as are connected to the computer. It is application independent and works with all forensic acquisition and analysis software that works on Windows. In order to ensure that you are working forensically sound environment SAFE Block XP provides automatic write blocking of all directly attached media, including IDE (PATA & SATA), SCSI, FC, SAS, USB, and IEEE1394.
SAFE Block XP identifies and provides access to Host Protected Areas (HPAs) and Device Configuration Overlay (DCOs) on IDE (PATA and SATA) disks, connected directly via PATA or SATA controllers. HPAs are temporarily removed and make no permanent modification to the disk configuration, using volatile HPA commands. Since a DCO cannot be removed temporarily, SAFE Block XP preserves all DCO information, allowing safe removal of the DCO or HPA/DCO combination, then upon completion of the acquisition, replacement of the DCO or HPA/DCO combination back to its original state.
- SAFE Block XP has passed all of NIST's Mandatory and Optional Test Assertions, including not allowing a protected drive to be changed, not preventing obtaining any information from or about any drive and not preventing any operations to a drive that is not protected.