Difference between pages "Logfile Analysis" and "JTAG Huawei TracFone M865C"

From ForensicsWiki
(Difference between pages)
Jump to: navigation, search
m
 
(Created page with "== JTAG Huawei TracFone M865C (Ascend II) == This phone is supported by the Cricket Network and Tracfone. This uses a Qualcomm 7627 600 MHz (S1) Processo and comes standard...")
 
Line 1: Line 1:
=Web Logfile Analytics]
+
== JTAG Huawei TracFone M865C (Ascend II) ==
Web logfile analytics software can process a log file and print a clever report. Normally this software is used by organizations that want to know how their website is doing, but it can also be used for network forensic analysis of logfiles.
+
  
; Analog
 
: http://www.analog.cx/
 
: Claims to be 'the most popular logfile analyser in the world'
 
  
; Webalizer
 
: http://www.mrunix.net/webalizer/
 
: "A fast, free web server log file analysis program"
 
  
; phpmyVisites
+
This phone is supported by the Cricket Network and Tracfone. This uses a Qualcomm 7627 600 MHz (S1) Processo and comes standard with Android version 2.3. This phone is unsupported by RIFF Box for the JTAG process for resurrector.
: http://www.phpmyvisites.us/
+
: New "clicks heatmap" shows where people are clicking on your website; depends on JavaScript. (on the other hand, doesn't need access to your logfiles)
+
  
; AWStats
 
: http://awstats.sourceforge.net/
 
: "Free powerful and featureful tool that generates advanced web, streaming, ftp or mail server statistics, graphically."
 
  
; JasperReports
+
{| border="1" cellpadding="2"
; http://jasperforge.org/sf/projects/jasperreports
+
|-
: Java reporting tool.
+
| [[ File:huawei-tracfone-m865c-front.png | 400px ]]
 +
| [[ File:huawei-tracfone-m865c-back.png | 400px ]]
 +
|-
 +
|}
  
; Open Web Analytics
 
: http://wiki.openwebanalytics.com/index.php?title=Main_Page
 
: "an open source web analytics framework written in PHP"
 
  
; Breadboard BI Web Analytics
 
: http://sourceforge.net/projects/web-analytics/
 
: "uses open source tools to collect and distribute web analytics data."
 
  
[[Category:Tools]]
+
=== Getting Started ===
 +
 
 +
 
 +
What you need:
 +
 
 +
 
 +
# Riff Box
 +
 
 +
# USB to Micro USB cord
 +
 
 +
 
 +
 
 +
=== NAND Dump Procedure ===
 +
 
 +
# Disassemble the phone down to the PCB.
 +
# Connect the RIFF box to the PC via USB.
 +
# Connect the RIFF box to the PCB via the JTAG pins.
 +
# Connect the PCB to a Micro USB cord and power via a power supply.
 +
# Start the "RIFF box" software.
 +
# Power the PCB.
 +
# Dump the NAND.
 +
 
 +
The TAPS are located under the battery, behind the Huawei phone label.  The phone will be powered by a Micro USB cord from an AC battery charger.
 +
 
 +
The TAPS order is as follows:
 +
 
 +
# 1=Not Used
 +
# 2=TCK
 +
# 3=GND
 +
# 4=TMS
 +
# 5=TDI
 +
# 6=TDO
 +
# 7=RTCK
 +
# 8=TRST
 +
# 9=NRST
 +
 
 +
 
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[ File:huawei-tracfone-m865c-taps.png | 400px ]]
 +
|-
 +
|}
 +
 
 +
 
 +
 
 +
For the TAPs, the Huawei-8650 was utilized, pictured above. The TAPS on the M865C are located in the same location as the 8650. See below for TAPS locations.
 +
 
 +
 
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[ File:huawei-tracfone-m865c-soldered-taps.png | 400px ]]
 +
|-
 +
|}
 +
 
 +
 
 +
 
 +
After the wires are connected to the board, the phone is powered by the USB connection. Plug the Micro USB into the USB connection on the device and then plug the phone into a wall outlet. The phone should respond with the vibrator switch activating for less than a second.
 +
 
 +
Launch the Riff Box JTAG Manager and use the following settings:
 +
 
 +
* JTAG TCK Speed = RTCK
 +
* Resurrector Settings= Huawei U8650
 +
* Auto FullFlash size
 +
 
 +
 
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[ File:huawei-tracfone-m865c-riff-settings.png | 400px ]]
 +
|-
 +
|}
 +
 
 +
 
 +
 
 +
Advanced Settings:
 +
 
 +
* Ignore Target IDCODE during Resurrection and DCC Loader operations
 +
 
 +
 
 +
 
 +
{| border="1" cellpadding="2"
 +
|-
 +
| [[ File:huawei-tracfone-m865c-riff-advanced-settings.png | 400px ]]
 +
|-
 +
|}
 +
 
 +
 
 +
 
 +
Then connect and get the ID, you should receive the dead body signal. Then read the memory.  JTAG complete.
 +
 
 +
 
 +
=== Notes ===
 +
 
 +
 
 +
 
 +
The phone has a 512 MB NAND flash memory chip which should take approximately 30 minutes to download.

Revision as of 19:29, 11 September 2013

JTAG Huawei TracFone M865C (Ascend II)

This phone is supported by the Cricket Network and Tracfone. This uses a Qualcomm 7627 600 MHz (S1) Processo and comes standard with Android version 2.3. This phone is unsupported by RIFF Box for the JTAG process for resurrector.


400px 400px


Getting Started

What you need:


  1. Riff Box
  1. USB to Micro USB cord


NAND Dump Procedure

  1. Disassemble the phone down to the PCB.
  2. Connect the RIFF box to the PC via USB.
  3. Connect the RIFF box to the PCB via the JTAG pins.
  4. Connect the PCB to a Micro USB cord and power via a power supply.
  5. Start the "RIFF box" software.
  6. Power the PCB.
  7. Dump the NAND.

The TAPS are located under the battery, behind the Huawei phone label. The phone will be powered by a Micro USB cord from an AC battery charger.

The TAPS order is as follows:

  1. 1=Not Used
  2. 2=TCK
  3. 3=GND
  4. 4=TMS
  5. 5=TDI
  6. 6=TDO
  7. 7=RTCK
  8. 8=TRST
  9. 9=NRST


400px


For the TAPs, the Huawei-8650 was utilized, pictured above. The TAPS on the M865C are located in the same location as the 8650. See below for TAPS locations.


Huawei-tracfone-m865c-soldered-taps.png


After the wires are connected to the board, the phone is powered by the USB connection. Plug the Micro USB into the USB connection on the device and then plug the phone into a wall outlet. The phone should respond with the vibrator switch activating for less than a second.

Launch the Riff Box JTAG Manager and use the following settings:

  • JTAG TCK Speed = RTCK
  • Resurrector Settings= Huawei U8650
  • Auto FullFlash size


400px


Advanced Settings:

  • Ignore Target IDCODE during Resurrection and DCC Loader operations


400px


Then connect and get the ID, you should receive the dead body signal. Then read the memory. JTAG complete.


Notes

The phone has a 512 MB NAND flash memory chip which should take approximately 30 minutes to download.